Note: Regarding product purchase, technical maintenance and other services, welcome to send email: send email
The UHV-316X series motor type test system is suitable for single/three-phase asynchronous motors, three-phase permanent magnet synchronous motors, DC motors and other types of motors. Customized design is available according to users' different product requirements.
The test software of this system is independently developed by our company with complete independent intellectual property rights. The software features a clean and elegant interface, simple and convenient operation, and good adaptability. It can automatically generate test reports and corresponding test curves. All performance indicators of the test system comply with relevant international and national standards such as IEC 60034-2-1, GB 755, GB/T 1032, GB/T 1029, GB/T 1311, IEEE 112, and CSA 390.
product names: motor comprehensive test bench, motor test bench, DC motor comprehensive test bench, motor comprehensive test system, AC motor comprehensive test bench
| Power range | 60W~3MW; customization for other power ratings supported |
| Test voltage level | 24V~10kV |
| Speed range | 0~24000rpm |
| Frequency range | 0~1000Hz |
| DC resistance | Class 0.2 |
| Electrical parameters and transformers(sensors) | Class 0.2 |
| Temperature | ±1°C |
| Speed | ±1rpm(below 1800 rpm); ±0.1%(above 1800 rpm) |
| Torque | ±0.2% |
Subject to the actual configuration.
1.The appearance of the product shall be subject to the actual product，Technical parameters with model if there are any changes，without notice.In case of misappropriation or copying, legal liability will be investigated.
2. For more information about Wuhan UHV, please enter product center . Service email：info@hvtest.cc
Ambient and winding temperature test: using thermocouples, thermistors, etc.
DC resistance test: converted in accordance with standards
Locked-rotor test: measuring locked-rotor torque and locked-rotor current curves
No-load characteristic curve test: automatic analysis of iron loss and mechanical loss
Temperature rise test: automatic plotting of temperature curves; actual load/equivalent load method optional
Load test: measuring efficiency/power factor curves; actual load/equivalent load method optional
Stray loss test: different methods available for determining stray loss of motors
T-n curve plotting (measurement of maximum torque and minimum torque)
Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.
email： info@hvtest.cc
Skype： Tina Qiao
+8615172408058
