Suitable for voltage test items of electrical equipment with large insulation equivalent capacitance
Note:
Regarding product purchase, technical maintenance and other services, welcome to send email:
Ultra low frequency high voltage generator combines modern digital frequency conversion advanced technology, fully controlled by microcomputer control, boost, step-down, measurement, protection, and manual intervention in the automatic boost process. Because it is fully electronic, it is small in size and light in weight, large screen LCD display, clear and intuitive, and printer output test report. The design indicators are in full compliance with the "General Technical Conditions for Power Equipment Special Test Instruments, Part 4: General Technical Conditions for Ultra Low Frequency High Voltage Generators", which is very convenient to use. At present, both domestic and foreign methods use mechanical methods for modulation and demodulation to produce ultra-low frequency signals. Therefore, there are sinusoidal waveforms that are not standard, measurement errors are large, sparks are discharged in high voltage parts, equipment is cumbersome, and the second and fourth quadrants of sine waves are also needed. The high-power high-voltage resistor performs discharge shaping, so the overall power consumption of the device is large. Ultra low frequency high voltage generator can overcome such shortcomings.
Product nickname: Ultra low frequency high voltage generator, 0.1Hz Ultra low frequency high voltage generator, ultra low frequency AC high voltage generator, ultra low frequency AC voltage test device
| model | HTDP-50H | HTDP-30H | HTDP-80H |
| Output rated voltage | 50kV(Peak) | 30kV(Peak) | 80kV(Peak) |
| Output frequency | 0.1Hz,0.05Hz,0.02Hz | ||
| Load capacity | 0.1Hz：≤0.5μF | 0.1Hz：≤1.1μF | 0.1Hz：≤0.5μF |
| 0.05Hz：≤1.1μF | 0.05Hz：≤2.2μF | 0.05Hz：≤1.1μF | |
| 0.02Hz：≤2.5μF | 0.02Hz：≤5.5μF | 0.02Hz：≤2.5μF | |
| measurement accuracy | ±（3% full scale+0.5kV） | ||
| Voltage waveform distortion | ≤5% | ||
| power supplyFuse |
20A |
10A | 25A |
| weight | Controller：6kg | ||
| Boost body：50kg | Boost body：30kg | Boost body I：30kg，Boost body II：50kg | |
| Conditions of Use | temperature：-10℃∽+40℃；humidity：≤85%RH | ||
| power supply | Exchange 50 Hz，220V ±5% | ||
| use | Cable for the corresponding voltage, generator | For 10kV and below cables, generator | For cables of 35kV and below, generator |
1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.
2. For more information about Wuhan UHV, please enter product center . Service email：qiao@hvtest.cc
1, current, voltage data are directly obtained through high-voltage side sampling, so the data is true and accurate
2, overvoltage protection: When the output exceeds the set pressure limit value, the instrument will stop protection, the action time is less than 20ms
3, over-current protection: designed for high and low voltage double protection, the high-voltage side can be precisely stopped according to the set value; the low-voltage side of the current will exceed the rated current will be shutdown protection, the action time is less than 20ms
4, the high-voltage output protection resistor is designed in the Boost body, so there is no need to connect another protection resistor
5, due to the use of high and low voltage closed-loop negative feedback control circuit, so the output has no capacity rise effect
Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.
email： qiao@hvtest.cc
WhatsApp： +8615871365102
