Lightning Protection Element Tester

FC-2GB Lightening Protection Components Tester

Suitable for testing zinc oxide arresters (varistor), cermet two, three-electrode discharge tubes and other overvoltage protection components

Note: Regarding product purchase, technical maintenance and other services, welcome to send email:

Product Introduction

Lightning Protection Element Tester is suitable for testing the DC parameters of over-voltage protection components such as zinc oxide surge arresters (varistor), cermet two, three-electrode discharge tubes, and vacuum lightning arresters.

Product nickname:Lightning Protection Element Tester, lightning protection component tester, lightning protection component measuring instrument

Product Parameters

Varistor measurement

Technical index Measuring range Maximum error Test Conditions
Starting action voltage(U1mA) 0~1999V ≤±1%±1d 1mA±5μA
Leakage current (I0.75U 1mA) 0~199.9μA ≤±2μA ±1d 0.75 U1mA

Discharge tube measurement

Technical index Measuring range Maximum error Test Conditions
DC breakdown voltage(Vsdc) 5~1999V ≤±1%±1d Voltage rise rate:100V/S±10%

Other parameters

Insulation resistance 6MΩ(500V)
Withstand voltage AC1.5kV 50Hz 1min
Working temperature and humidity 0~+40℃,≤85%RH
Store temperature and humidity -10℃~+50℃,≤90%RH
power supply DC15V dedicated power supply
Power 8W
Instrument iemension 208×190×78mm3
Weight ≤1kg

1. The appearance of the product is subject to the actual product. The Technical Parameters and model numbers are subject to change without notice. If there is misappropriation or copying, legal liability will be pursued.

2. For more information about Wuhan UHV, please enter product center . Service

Product Characteristics

Product Picture

Product attachment diagram

Product detail map

Product Certificate

Enterprise products in strict accordance with international and national standards and rules of industry production, through the national, provincial and municipal electric power research institute and electric power authorities detection, measuring center, fully passed the ISO9001 international quality management system certification, the licence for manufacturing measuring instruments of the People's Republic of China, GB/T19001-2016 quality management system requirements, GB/T24001-2016 environmental management system requirements, GB/T45001-2020 occupational health and safety management system requirements.

Recommended Products